Reflects the sun
Light and reflective finishes reduce heat gain into the attic compared with darker roof surfaces.
Metal Roofing
Clean Lines. Serious Weather Protection.
Metal roofing pairs a modern look with fast water shedding and reflective finishes that help with Florida heat. We help you choose the right panel, finish and components for your home.
- Standing seam
- 5V crimp
- Stone-coated
- Coastal-grade options
A metal roof is only as good as the details you cannot see from the street — the clips, the fasteners, the flashing and the underlayment beneath it. That is where we spend our attention.
Why Metal
What makes metal a strong fit for South Florida
Sheds heavy rain
Smooth, continuous panels move water off the roof quickly during summer downpours.
Engineered attachment
Panels, clips and fastening schedules are designed and tested as systems for wind resistance.
Lightweight
Metal adds far less weight to the structure than tile, which can simplify a material change.
Coastal options
Panel materials, coatings and fasteners can be selected for homes close to salt water.
Design flexibility
From sleek standing seam to traditional 5V and shingle- or tile-look profiles, metal suits many styles.
Panel Types
Three ways to put metal on a roof
Standing Seam
Vertical panels joined by raised seams, with fasteners concealed beneath. It is the clean, architectural look most people picture when they think of a modern metal roof.
- Concealed fasteners
- Modern, minimal profile
- Wide color selection
5V Crimp
A classic Florida profile with five V-shaped ribs per panel, fastened through the face. It brings an Old Florida character and is a familiar sight on cottages and coastal homes.
- Exposed-fastener system
- Traditional Florida look
- Fasteners need periodic checks
Stone-Coated Metal
Metal panels coated with stone granules and pressed into shingle, shake or tile profiles. A way to get the look of tile or shingle with a lighter-weight metal roof.
- Tile- or shingle-look profiles
- Lighter than concrete or clay tile
- Textured, low-glare surface
How It Compares
Metal vs. shingle vs. tile
A qualitative overview to help you weigh the options. Your home’s structure, budget and HOA rules all factor in.
| Feature | Metal | Architectural Shingle | Concrete / Clay Tile |
|---|---|---|---|
| Look | Modern or traditional, depending on profile | Classic and textured | Mediterranean and Spanish-style |
| Weight | Light | Light | Heavy |
| Heat & sun | Reflective finishes reduce heat gain | Darker colors absorb more heat | Air space under tile helps; color matters |
| Rain shedding | Fast, smooth runoff | Good when properly installed | Relies heavily on underlayment |
| Coastal considerations | Choose coatings and fasteners for salt air | Fasteners and flashing still corrode | Fasteners and flashing still corrode |
| Relative upfront cost | Higher | Lower | Higher |
General comparison only — individual products vary. We will review specific options and pricing for your home in a written proposal.
Metal in Context
Metal roofs on South Florida homes
Dark, light, modern and coastal — metal adapts to a wide range of architecture.
Illustrative images — not photographs of completed Elite Tech Roofing projects.
FAQ
Metal Roofing Questions
Is a metal roof louder in the rain?
Over a solid roof deck with underlayment and an insulated attic, most homeowners find rain noise similar to other roof types. The noisy metal roofs people remember are usually installed over open framing, like a barn or carport.
Will a metal roof rust near the ocean?
Salt air accelerates corrosion of metal and fasteners, so material and component choices matter on coastal homes. Panel material, coating system and fastener type should all be selected with your distance from salt water in mind. We discuss these options during your estimate.
Does a metal roof make the house hotter?
Not necessarily. Lighter or reflective finishes reflect much of the sun’s energy, which reduces heat gain into the attic compared with a dark surface. Color choice and attic ventilation both play a role.
What is the difference between standing seam and 5V crimp?
Standing-seam panels use raised seams with concealed clips or fasteners, giving a clean look with fewer exposed screws. 5V crimp is an exposed-fastener panel with a traditional Old Florida look. Exposed-fastener systems need periodic checks of screws and washers over time.
Can metal go over my existing shingle roof?
Some codes and manufacturers allow it under certain conditions, but in most cases we recommend tearing off down to the deck so the deck can be inspected and properly fastened. We will explain what is permitted and advisable for your specific roof.
Does lightning strike metal roofs more often?
Metal roofs do not attract lightning. Lightning tends to strike the highest point in an area regardless of the roofing material.
Thinking About Metal?
See what metal would look like on your home
We will review panel options, colors and coastal components with you and provide a free written proposal. Also see our roof replacement process.